VR1-SSL • SmartShell Touchscreen Control GUI
New standard
The SmartShell Touchscreen Control GUI sets a new benchmark for controlling robotic camera systems.The SmartShell user interface can control upto 255 separate camera systems.
The SmartShell Touchscreen Control GUI sets a new benchmark for controlling robotic camera systems.The SmartShell user interface can control upto 255 separate camera systems.
Program presets and moves
Users can add presets, program complex on-air camera moves. Operators can set joystick control speed, damping and limits.
Drag & Drop to Program camera moves
Once camera presets are set, the user can drag these presets into a time-line. A time (distance) between these ‘keyframes’ can be added. Upon excecution, the robotic camera system will perform an interpolated move between presets.
Presets
Add a preset to the system
Add a preset to the system
Keyframess
Use presets to create a timeline based move.
Use presets to create a timeline based move.
Verify Move
Not all programmed moves can be excecuted properly by the robotics, for example when the presets are set to far away and need to be reached in a to short time. Use the verify function to check if your move can physically be excecuted by the system.
Not all programmed moves can be excecuted properly by the robotics, for example when the presets are set to far away and need to be reached in a to short time. Use the verify function to check if your move can physically be excecuted by the system.
Connect